Toyota Forklift Diesel 8FD 8FG

SAFETY

• • Toyota SAS monitors key forklift operations, detecting and counteracting instability to help reduce the risk of tip-overs
  • When it senses instability, the Active Control Rear Stabiliser locks the rear axle to help reduce lateral tip-overs
  • Active Mast Function Controller senses and reacts to instability by limiting mast angle and speed according to the load's height and weight.
  • The OPS system helps to prevent accidental movement of the forklift and forks when the operator is not seated at the controls. The OPS system senses if the operator is properly seated and at the controls by means of the seat switch. When the operator is properly seated at the controls the seat switch will go “on”.
  • If the operator is not seated at the controls the seat switch will turn “off”, and the OPS system will disable the ability to lower the forks, or tilt forward or back along with all the other loading and unloading movements.

PRODUCTIVITY

• • SAS Automatic Fork Levelling Control levels forks with the ground for easier pallet retrieval
  • Wide-view Mast offers an unparalleled view of the forks in any position
  • Fingertip-controlled Electronic Shift offers quick, convenient shifting between forward and reverse
  • Tight turning radius increases manoeuvrability in small areas with synchronizing of the steering wheel and angle of rear wheels

PERFORMANCE

• • Toyota's exclusive industrial 4Y Gasoline Engine provides fuel economy with minimum maintenance and low noise levels
  • 2Z and 1DZ-11 Diesel Engine's 4 point floating mounting system reduces engine noise
  • Toyota's hydraulic lifters help lower engine noise and reduce maintenance
  • Optional maximum travel speed can be set for optimum performance as well as security while training new employees
  • Increased structural thickness improves frame rigidity and prolongs service life.

COMFORT / ERGONOMICS

• • Ergonomically-mounted hydraulic controls allow for comfortable, "eyes forward" operation
  • Adjustable, ultra-comfortable Operator Restraint Suspension seat with exclusive lumbar support for comfort and protection
  • Spacious operator compartment with wider foot area helps reduce operator fatigue.
  •The design of the Toyota 8-Series forklift is focused on improving the forward, downward, and upward operator’s visibility. The lower instrument panel, the relocated display, adjustment of the mast width and other factors ensure outstanding forward visibility on the Toyota 8-Series forklift.

EASE OF USE

• • Integrated monitoring system for quicker, easier troubleshooting diagnosis and servicing
  • Easy-lift engine hood with wide-access design and automatic assist damper provide quick access to the engine
  • No-tool floorboard removes in seconds for quicker servicing
  • Swing-Down LPG tank bracket makes switching tanks safe, quick and reduces lifting distance for the operator.

AVAILABLE AT TOYOTAFORKLIFT.VN

Toyota Forklift 8FG10, Toyota Forklift 8FG5, Toyota Forklift 8FG18, Toyota Forklift 8FG20, Toyota Forklift 8FG25, Toyota Forklift 8FG30, Toyota Forklift 8FGJ35, Toyota Forklift 8FGK20, Toyota Forklift 8FGK25, Toyota Forklift 8FGK2530
Toyota Forklift 8FD10, Toyota Forklift 8FD5, Toyota Forklift 8FD18, Toyota Forklift 8FD20, Toyota Forklift 8FD25, Toyota Forklift 8FD30, Toyota Forklift 8FDJ35, Toyota Forklift 8FDK20, Toyota Forklift 8FDK25, Toyota Forklift 8FDK2530

MAIN SPECIFICATIONS

Model		8FG10 8FD10	8FG15 8FD15	8FG18* 8FD18*	8 FGK20* 8FDK20*	8FG20 8FD20	8FGK25* 8FDK25*	8FG25 8FD25	8FGK30* 8FDK30*	8FG30 8FD30	8FGJ35 8FDJ35
Engine Model		4Y 1DZ-II	4Y 1DZ-II	4Y 1DZ-II	4Y 1DZ-II	4Y 1DZ-II, 2Z	4Y 1DZ-II	4Y 1DZ-II, 2Z	4Y 1DZ-II	4Y 1DZ-II, 2Z	4Y 2Z
Load Capacity	kg	1,000	1,500	1,750	2,000	2,000	2,500	2,500	3,000	3,000	3,500
Load Center	mm	500	500	500	500	500	500	500	500	500	500
Overall Width	mm	1,045	1,070	1,070	1,155	1,150	1,155	1,150	1,255	1,240	1,290
Turning Radius (outside)	mm	1,910	1,990	2,010	2,040	2,200	2,090	2,280	2,130	2,430	2,490
Overhead Guard Height	mm	2,080	2,080	2,080	2,085	2,110	2,085	2,110	2,085	2,170	2,180
Length to Fork Face	mm	2,240	2,290	2,310	2,380	2,560	2,445	2,635	2,520	2,795	2,865

NOTE: *Powershift models

ENGINE SPECIFICATIONS

Model		TOYOTA 4Y Gasoline
Piston Displacement	cc	2,237
Rated Horsepower/r.p.m.	kW	40/2,400 (43/2,600)
Rated Torque/r.p.m.	N-m	161/1,800

NOTE: ( ) for 30(32)-8FG30.8FGJ35

Toyota Forklift 8FG10, Toyota Forklift 8FG5, Toyota Forklift 8FG18, Toyota Forklift 8FG20, Toyota Forklift 8FG25, Toyota Forklift 8FG30, Toyota Forklift 8FGJ35, Toyota Forklift 8FGK20, Toyota Forklift 8FGK25, Toyota Forklift 8FGK2530

Model		TOYOTA 1DZ-ll Diesel	TOYOTA 2Z Diesel
Piston Displacement	cc	2,486	3,469
Rated Horsepower/r.p.m.	kW	40/2,400 [44/2,600]	49/2,200
Rated Torque/r.p.m.	N-m	166/1,600	215/1,600

NOTE: [ ] for 60(62)-8FD20.25.30
Toyota Forklift 8FD10, Toyota Forklift 8FD5, Toyota Forklift 8FD18, Toyota Forklift 8FD20, Toyota Forklift 8FD25, Toyota Forklift 8FD30, Toyota Forklift 8FDJ35, Toyota Forklift 8FDK20, Toyota Forklift 8FDK25, Toyota Forklift 8FDK2530